Counter Height Bar Stools
Counter height barstool frame has a wide stance that not only looks stable, but also is. Made up of 1" diameter, 19 gauge bright chrome finished tubular steel legs with a 1" diameter, 19-gauge chrome foot ring. On the end of each leg is a mar-resistant.
Counter height bar stools has a durable and easy to care for black powder coat finish.
Legs are connected with curved pieces to make a circle. These round design barstools have square legs that taper and curve out slightly at the bottom for style and stability. These handsome Counter Stools are finished in a Soft Sheen Distressed Cherry finish and feature black leather seating. Also available in 29 inch barstool height. All measurements are approximate.
A basic formula to determine the correct seat height is to first measure your work surface height. Another consideration is whether you want to place your legs under the counter top. If you have a thin counter top, then measure from the floor to the top of counter top minus approximately 12 inches. The resulting measurement is usually the suggested seat height.
If you have drawers under your counter or a thick 4" to 6" counter top, then you should still allow about 12" for your legs but measure from the bottom of the counter to the seat height. This should allow for sufficient room for your legs to fit underneath your counter top.
The stools shown below have a seat height range of about 5 inches. Usually this will allow you to adjust the seat height to accommodate your particular needs.
Articles Of Interest
